-
ANSI Gate Valve1.Full port, outside screw and yoke(os&y). 2.Bolted bonnet. 3.Flexible wedge, fully guided. 4.Rising stem and non-rising handwheel. 5.Avail able with gear operator. 6.Flanged ends. 7.Butt-welding ends
-
ANSI Globe Valve1. Streamline, outside screw and yoke. 2. Bolted bonnet. 3. Loose disc. 4. Rising stem and handwheel. 5. Yoke integral with bonnet. 6. Available with gear operator. 7. Flanged ends
-
Plunger ValveThe Plunger Valve (Piston Type Flow & Pressure Control Valve) is designed according to hydrodynamics,to control the speed and the pressure.It's widely used in power stations,water supply and other
-
NON-Rising Stem Soft Sealing Gate Valve (Flange Ends)🔧 Key Specifications Nominal Diameter : DN50 ~ DN300 (2" ~ 12") Connection Type : Flange Ends Stem Type : Non-Rising Stem (Inside Screw Stem) Seal Type : Soft Sealing Suitable Media :
-
Rising Stem Soft Sealing Gate Valve, Flange Ends With Sig...This Rising Stem Soft Sealing Gate Valve with Signal Device (DN50~DN300) is a core control equipment for fire protection and water supply systems. The rising stem design allows the valve stem to
-
Z4IX RISING STEM RESILIENT-SEATED GATEVALVEThe valve is designed with a fully encapsulated resilient disc and valve seat, featuring low operating torque, long service life, no gate slot, zero leakage, and minimal displacement of the wedge
-
Three-way Ball ValveProduct Specification. Design standard: GB T12237-1989. DIN 3357/ 1.API 608. Flange standard: GB/ T9113.1, JBIT 79, DIN 3202, JIS B2002, ASME B16.10. Structural standard: GB/T12221-1989, DIN 3202,
-
Vertical Lift Check ValveDesign standard: GB/T12236. Flange standard: GB/T12221. Structural standard: JB/T79. Test standard: JB/T9092
Getting started; Ansi Gate Valve; Ansi Gate Valve - China Manufacturers, Factory, Suppliers. With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and...
ANSI Gate Valve ANSI American standard gate valve design and manufacture in accordance with ANSI B16.34, American Petroleum Institute standards API6D and API600 requirements; American standard flange...
Ansi Gate Valve We have been also specializing in improving the things administration and QC system to ensure that we could preserve terrific gain within the fiercely-competitive company for Ansi...
2.2 Mpa. Gas-Tightness Test. 0.6 MPa. Max Working Pressure. -29°C to 425°C. Technical Specifications. Basic design and manufacture according to API 602/BS5352. Face to face dimension: ASME B16.10....
DieFei Valve company main produce: ANSI Gate Valve Gate valves normally have flanged ends which are drilled according to pipeline compatible flange dimensional standards. Gate valves are typically...
JV090023 – Three-Way T-Ported Stainless Steel Ball Valve, ISO 5211 Direct Mount, Flanged ANSI 150. A three-way, T-Ported stainless steel ball valve making it suitable for many applications where...