Hammer-Type Automatic Pressure Control Slowly Closes The Check-Back Butterfly Valve

Send Inquiry
Hammer-Type Automatic Pressure Control Slowly Closes The Check-Back Butterfly Valve
Details
Peculiarity:
1, The valve has fast opening, fast closing and the end of about 10 degrees to start slow closure.
2, Because of the slow-closing function,with the elimination of water hammer function.
3, With energy-saving function, do not need electricity can be turned off.
4, Valve fully open,if the power failure can maintain the full open function.
Category
Valves For Pump Rooms (Stations)
Share to
Description
 

Product Introduction

 

The Hammer-Type Automatic Pressure Control Slowly Closes The Check-Back Butterfly Valve is a cutting-edge integrated pipeline control device engineered for critical fluid management systems. Combining the dual functions of a check valve and a butterfly valve into a single, compact unit, this valve is specifically designed for installation at the pump outlets of pumping stations across water conservancy, electric power, and water supply & drainage sectors.

Unlike conventional separate valve configurations, this innovative solution integrates mechanical, hydraulic, and structural engineering to deliver seamless flow control, backflow prevention, and system protection. Its core operation relies on a gravity-driven hammer energy storage mechanism: when the pump operates normally, the valve opens under medium pressure while lifting the hammer to store potential energy; during shutdown or power failure, the hammer's gravitational force triggers automatic closure . This design not only simplifies pipeline layout but also reduces infrastructure investment by eliminating the need for multiple independent valves . Crafted to adhere to international industrial standards, it ensures reliable performance in demanding fluid control environments.

 

 

Core Features

 

1

Dual-Stage Opening & Closing Mechanism: The valve achieves rapid opening and fast initial closing to minimize system response time, then initiates a precise slow-closing phase when the disc reaches the final 10° of its travel. This two-stage action prevents sudden pressure surges while ensuring timely flow cutoff.

2

Water Hammer Elimination: Leveraging the calibrated slow-closing function, the valve effectively mitigates water hammer-a destructive force caused by sudden flow reversal or shutdown. By controlling the closure rate, it reduces peak pressure spikes by up to 70% compared to standard valves, protecting pumps, pipes, and fittings from damage.

3

Energy-Saving Gravity-Driven Closure: The hammer's gravitational potential energy serves as the sole power source for closure, eliminating reliance on external electricity or hydraulic supplies. This passive design reduces operational costs and enhances reliability in remote or unstable power conditions.

4

Power Failure Protection: When fully open, an automatic locking device secures the hammer in the raised position during power outages . This maintains full flow capacity to prevent system disruption, with manual override options available for emergency operations.

5

Integrated Dual Functionality: Replaces both check valves (for backflow prevention) and butterfly valves (for flow control), reducing installation space and leak points. The triple-offset sealing structure ensures Class VI bubble-tight shutoff for maximum efficiency.

 

 

Application Scenarios

Water Conservancy Pumping Stations

Ideal for irrigation and flood control systems, where it prevents backflow and protects centrifugal pumps from reverse rotation damage.

Electric Power Industry

Installed at the outlet of circulating water pumps in thermal power plants and hydropower stations, safeguarding turbine inlets and cooling water pipelines.

Municipal Water Supply & Drainage

Used in water treatment plants and distribution networks to maintain pressure stability and prevent contamination from backflow.

Industrial Fluid Systems

Suitable for metallurgical cooling water circuits and petrochemical storage tank pipelines, withstanding temperatures from -40°C to 200°C and pressures up to PN16.

 

 

FAQ

 

Q1: What media can this valve handle?

A1: The standard model is optimized for clean water and wastewater. Specialized versions with corrosion-resistant stainless steel bodies and PTFE seals are available for chemicals, oils, and saline solutions.

Q2: How does the slow-closing speed get calibrated?

A2: The closure rate is pre-set at the factory based on your pipeline diameter, flow rate, and fluid properties. Field adjustments can be made via a hydraulic throttle valve in the linkage system.

Q3: Is manual operation possible during system failures?

A3: Yes, the valve is equipped with a manual oil pump (hand pump) that allows operators to lift or lower the hammer manually, ensuring operational flexibility during maintenance or emergency situations.

Q4: What certifications does the valve comply with?

A4: All units meet ASME B16.34 design standards and API 598 testing requirements. ATEX and SIL certifications are available for explosive or safety-critical environments.

Q5: What is the expected service life?

A5: The heavy-duty ductile iron body and hardened stainless steel components provide a service life of 5+ years in continuous operation, with seal replacements required only every 2-3 years.

Hot Tags: hammer-type automatic pressure control slowly closes the check-back butterfly valve, China hammer-type automatic pressure control slowly closes the check-back butterfly valve manufacturers, suppliers, factory, Liquid Controlled Hemispherical Valve, Hammer Type Automatic Pressure Control Slowly Closes The Check Back Butterfly Valve, valves for pump rooms stations , The Storage Fluid Control Slowly Shuts Down The Check Back Butterfly Valve

Send Inquiry