Insert for Drilling

Send Inquiry
Insert for Drilling
Details
Our Insert For Drilling (Quick-Drilling Inserts) are precision-manufactured cutting solutions engineered to deliver exceptional performance across diverse drilling applications.
Category
Insert
Share to
Description
 

Product Introduction

Material Grade (Grade)

We offer a comprehensive range of high-performance grades optimized for different workpiece materials, leveraging advanced coating technologies to maximize tool life and processing reliability:

GC1344

A PVD-coated grade ideal for ISO P (steel), K (cast iron), S (superalloys), and H (hardened steel) materials. Equipped with Zertivo® coating technology, it ensures superior wear resistance and edge strength, providing up to 30% longer tool life compared to standard coatings.

GC1144

A specialized PVD-coated grade designed for stainless steel and titanium alloy machining. Its enhanced toughness prevents edge chipping in high-torque applications, making it a top choice for aerospace and medical component manufacturing.

GCN134

A CVD diamond-coated grade for non-ferrous metals (e.g., aluminum, copper). It exhibits extreme wear resistance and anti-built-up edge (BUE) properties, ensuring mirror-finish surfaces in automotive and electronics parts production.

AP301U

A TiALN PVD-coated grade with an ultra-fine grain substrate. It balances wear resistance and toughness, suitable for steel, stainless steel, and high-temperature alloys in general engineering.

 

Chipbreaker
 

Our innovative chipbreaker geometry is precision-machined to ensure optimal chip control and evacuation, a critical factor in deep-hole drilling and high-speed operations:

Dual-Slot Design

Integrates a 0.8mm-deep × 2.0mm-wide main chipbreaker and a 1.0mm-deep × 2.0mm-wide sub-chipbreaker. This combination splits long chips into manageable "C-shaped" fragments, preventing clogging and reducing cutting zone temperature.

Reinforced Edge Geometry

Features a 0.8mm negative land at the chipbreaker's leading edge, enhancing edge stability without compromising sharpness-essential for high-feed drilling of hard materials.

Optimized Rake Angle

A 10° main rake angle and 20° secondary rake angle facilitate smooth chip flow, even in low-power machines, while minimizing cutting forces.

 

 

Features

 

4-Way Indexable Design

Each insert has four cutting edges, reducing tool change frequency by 75% and lowering per-hole costs.

01

Advanced Coating Technologies

Zertivo® PVD coating (for GC1344) and Inveio™ single-crystal technology (for GC4334) provide superior resistance to crater and flank wear, ensuring consistent performance in high-volume production.

02

High Process Stability

The 1.5×DC-length guiding land ensures drilling straightness (IT9-IT10 tolerance), critical for automotive cylinder blocks and aerospace structural parts.

03

Wide Compatibility

Available for drill diameters 9.5–114mm, compatible with CoroDrill® DS20, 870, 880, and 881 systems, as well as standard side-lock holders.

04

 

 

Applications

Our Insert For Drilling excels in multiple industries, addressing diverse drilling challenges:

Automotive

Machining engine blocks (cast iron/steel) with GC1344 grade-achieves 800+ holes per insert, 20% faster than competitors.

Aerospace

Drilling CFK (carbon fiber-reinforced plastic) and titanium alloy parts with GC1144 grade-reduces burr formation by 90% and extends tool life by 60%.

Electronics

Precision drilling of aluminum heat sinks with GCN134 grade-delivers Ra 0.8μm surface finish, meeting strict industry standards.

General Engineering

Multi-material drilling (steel/stainless steel) with AP301U grade-ideal for job shops requiring versatile, cost-effective solutions.

 

 

FAQ

 

Q: How do I select the right grade for my application?

A: Match the grade to your workpiece material: GC1344 for steel/cast iron, GC1144 for stainless steel/titanium, GCN134 for non-ferrous metals, and AP301U for superalloys. Contact our technical team for custom recommendations.

Q: Can these inserts be used for deep-hole drilling?

A: Yes. The dual-slot chipbreaker and optimized flute design enable reliable drilling up to 30×DC, suitable for mold and die manufacturing .

Q: What is the typical tool life for these inserts?

A: Tool life varies by material: 500–1,000 holes for steel (GC1344), 300–600 holes for stainless steel (GC1144), and 800–1,500 holes for aluminum (GCN134) .

Q: Are the inserts compatible with my existing drill holders?

A: Our inserts fit standard CoroDrill® and Korean-style insert drills. Please provide your drill model for compatibility verification.

Q: How should I maintain the inserts for optimal performance?

A: Use high-pressure coolant (10–15 bar) for steel/stainless steel; dry drilling is acceptable for non-ferrous metals. Replace inserts when wear reaches 0.3mm on the flank face.

Hot Tags: insert for drilling, China insert for drilling manufacturers, suppliers, factory, Poly Crystalling Diamond Insert, Grooving Off Insert, insert, Insert for Drilling, Carbide Coated Insert for Turning, Cubic Boron Nitride Insert

Send Inquiry