There is no difference between the two. Alloy is tungsten steel, just with different names. If there is any difference, it lies in the appearance sometimes. For instance, the surface of some alloy tungsten steel drill bits is a bit brighter, while others are a bit darker. However, this "surface" issue has little to do with the material but is more related to the grinding wheel used for grinding the drill bit.
What should be noted when using drill bits
1. When storing drill bits, they must be placed in dedicated packaging boxes to prevent unnecessary damage caused by collisions between them. When in use, they need to be taken out of the packaging box and reinstalled into the machine equipment. Once used up, they should be put back into the dedicated packaging box.
2. When measuring the drill bit, you can use a microscope to measure it. Do not use measuring instruments that need to touch the drill bit, such as cutting edges or measuring instruments, to prevent the surface of the drill bit from being worn, which may cause unnecessary trouble.
3. When using a CNC drilling machine, a positioning ring must be used to ensure the depth of the drill bit is more accurate. If a positioning ring is not used, the drill bit must be installed on the spindle to ensure its normal use. If it is different, it will also cause the drill bit to fail to reach the table surface, resulting in the scrapping of the drilling material.
4. Usually, you can also use a microscope to inspect the cutting edge of the drill bit to see if there is any wear, so as to prevent any impact on the later construction.