Adjustment Method of Boring Tool
Boring tool is an indispensable important tool in precision hole machining. The accuracy of the holes processed by it can reach IT6 level, and the surface roughness can reach Ra0.8~1.6μm. Common types include thread-type fine-tuning boring tool, eccentric fine-tuning boring tool, sliding groove-type double-edged boring tool and floating boring tool. These fine-tuning boring tools have their own characteristics and are widely used in actual production. Among them, the thread differential fine-tuning boring tool has an innovative design, high fine-tuning accuracy, and can automatically eliminate thread gaps, making it a promising fine-tuning boring tool.
1. Design and Manufacturing of Thread Differential Fine-Tuning Boring Tool
The fine-tuning boring tool is composed of tool head body 1, internal thread guide sleeve 3, adjusting sleeve 6, etc., and is installed on the boring bar 2. The connecting thread between the adjusting sleeve 6 and the internal thread guide sleeve 3 is M27×1.5-7H, while the connecting thread between the tool head body connecting thread 8 and the adjusting sleeve 6 is M12×1.25-6H (left). To prevent the internal thread guide sleeve 3 from rotating and moving, a radial set screw 4 and an axial set screw 7 are used respectively. To ensure the axial guiding movement and fixation of the tool head body, two set screws 9 and 10 are adopted.

To eliminate the gap of the connecting thread M27×1.5-6H, a compression spring 5 is used. The function of the spring 5 is to make the adjusting sleeve 6 move to the right. During fine-tuning, the right side of the external thread M27×1.5 of the adjusting sleeve 6 is in contact with the left side of the internal thread M27×1.5 of the internal thread guide sleeve. The direction of the spring force is consistent with the direction of the extrusion force generated by the tool during cutting, so the boring tool will not loosen during work. This force is directly transmitted to the boring bar 2 through the radial and axial set screws 4 and 7 (see Figure 2).
When fine-tuning the adjusting sleeve 6, since the external thread M27×1.5 of the connection is a right-hand thread, when it is rotated clockwise for one week, the tool head body will move 1.5mm to the left (forward); at the same time, since the thread M12×1.25 connecting the adjusting sleeve and the tool head body is a left-hand thread, when it is rotated clockwise for one week, the left-hand thread will move the tool head body 1.25mm to the right (backward). Therefore, the actual movement of the tool head body at this time is:
L=1.5-1.25=0.25(mm)
That is, the boring tool actually only extends 0.25mm forward. Since there are 50 equally divided scales on the right end face of the adjusting sleeve 6, the feed rate of the boring tool when the adjusting sleeve 6 is finely adjusted by one grid is:
0.25÷50=0.005(mm/grid)=5μm/grid
|
Wide Boring Range Compared to traditional boring tools, it can achieve machining within the specified range without the need to purchase additional insert holders.
|
|
2. Key Manufacturing Points of Thread Differential Fine-Tuning Boring Tool
The tool head body 1 and the tool head body connecting thread 8 are made of 35CrMoA material. This material has high strength and toughness (hardness 30-38HRC), small quenching deformation, high creep strength at high temperature, and can work for a long time at 600℃.
The adjusting sleeve 6 should be made of 40Cr material. This material has moderate carbon content, good comprehensive mechanical properties, good hardenability, small thermal deformation, and the heat treatment tempering hardness is 260-290HBS.
The internal thread guide sleeve 3 is made of 20Cr material, and its internal thread M27×1.5 surface and inner hole f20 surface are carburized or nitrided to make the inner surface hardness reach 55-58HRC; the outer circle surface is not carburized or nitrided, and its hardness is 22-25HRC, which is similar to the hardness of the boring bar 2.
The two outer cylindrical surfaces of the internal thread guide sleeve 3 are selected as f26 H7/k6 and f34 H9/d9 respectively; f26 H7/k6 is the assembly reference hole, and the coaxiality tolerance of the two outer cylindrical surfaces and the inner hole is within 0.01mm, otherwise assembly stress will be generated. The fit between the inner hole of the internal thread guide sleeve 3 and the outer circle of the tool head body is preferably f20H8/g7 to ensure that the tool head body is not easy to vibrate during cutting.
The internal and external threads of the connecting thread M12×1.25-6H (left) between the adjusting sleeve 6 and the tool head body should be processed according to DH and Dh accuracy. At this time, the fit gap between the internal and external threads is Xmin=EI-es=0, which can improve the adjustment accuracy and reduce the thread gap.
The spring 5 is made of 60SiMn with a hardness of 45-50HRC. The specification of the spring is 1.6×24×12, n=3 turns, and the preload is about 50-60N.
The lower cylindrical surface of the two set guide screws is preferably made of 20Cr and carburized. The fit between the size of the set guide cylindrical part and the width of the keyway of the tool head body adopts a reasonable tolerance, and the carburized surface is 50-55HRC.
![]() |
Saw-tooth rail-type tool holder High rigidity in boring |
3. Installation and Adjustment of Fine-Tuning Boring Tool
During installation, first align the two prefabricated holes on the circumference of the internal thread guide sleeve 3 with the two set guide screw holes on the boring bar 2, install them into the holes of the boring bar 2, then screw in the set guide screws to basically position the internal thread guide sleeve 3, then drill, tap and install radial and axial set screws on the corresponding position of the boring bar with the internal thread guide sleeve 3 to completely fix the internal thread guide sleeve 3.
Unscrew the two set guide screws, install the spring 5 and the adjusting sleeve 6, compress the spring by about 10mm to basically reach the specified preload; fix the adjusting sleeve 6 so that it does not rotate, screw in the assembly of the tool head body and the tool head body connecting thread 8, make the M12×1.25 thread enter an appropriate number of turns, then align the keyway on the tool head body with the direction of the set guide screw hole, screw in the two set guide screws 9 and 10 to make the tool head body 1 not rotate, and the boring tool is completely assembled.
During adjustment, the tool tip of the boring tool must first be pre-adjusted to the ideal size (within ±0.1mm range) with a tool setting plate or dial gauge, slightly loosen the two set guide screws, then rotate the double-thread adjusting sleeve 6 for fine-tuning. After fine-tuning, tighten the two set guide screws again, and the boring tool can work.
Production practice has proved that the pitch differential fine-tuning boring tool has high fine-tuning accuracy, simple and convenient operation, good working stability, is not easy to vibrate during processing, and can automatically eliminate the gap of the M27×1.5 thread; at the same time, the tool head body of the fine-tuning boring tool adopts indexable inserts, which are easy to disassemble, assemble and replace, and can be widely used in precision hole machining on coordinate boring machines and CNC machine tools. The adjustment range of this fine-tuning boring tool is small. To adapt to large hole processing, the adjustment range can be expanded by changing the different lengths of the tool head body 1.

