Carbide Coated Insert for Turning Industry Knowledge

Mar 11, 2026

Leave a message

Core Position: The core tool for CNC turning, accounting for 80%-90% of the global cutting insert market, and the mainstream choice for metal processing.

I. Core Structure and Principle

1. Matrix (Cemented Carbide)info-566-507

Material: Sintered by powder metallurgy with WC (tungsten carbide) as the hard phase and Co (cobalt) as the binder phase.

Grain Classification: Coarse/medium grains (high strength and toughness, suitable for rough machining and interrupted cutting); fine/ultra-fine grains (high hardness and red hardness, suitable for finish machining and high-speed cutting).

Key Processes: Gradient sintering, hot isostatic pressing (density ≥99.5%).

2. Coating (Core Performance Source)

Thickness: 2-18μm; Function: Isolation, wear resistance, heat resistance, friction reduction, greatly improving tool life and cutting speed.

Process

Temperature

Coating Thickness

Representative Coatings

Core Advantages

Application Scenarios

CVD (Chemical Vapor Deposition)

700-1050℃

5-18μm

TiCN, Al₂O₃, TiN

Strong adhesion, wear resistance, anti-crater wear

Rough/finish machining of steel, high-speed continuous cutting

PVD (Physical Vapor Deposition)

400-600℃

2-6μm

TiN, TiCN, TiAlN, CrN

Low temperature, no damage to matrix, good toughness

Stainless steel, titanium alloy, superalloy, interrupted cutting

Mainstream Coating Materials: TiN (universal), TiCN (medium and high-speed cutting), TiAlN (high temperature, difficult-to-machine materials), Al₂O₃ (high-speed cutting of steel), multi-layer composite coatings (mainstream solution).

II. Core Performance Indicators

Hardness: 3000-5000HV (1400-1800HV for uncoated); Red Hardness: Maintains high hardness at 800-1100℃; Also has good wear resistance, toughness and thermal stability.

III. Main Application Fieldsinfo-708-487

Automotive manufacturing, aerospace (titanium alloy, superalloy), energy equipment, general machinery, mold manufacturing.

IV. Core Selection Points

1. By Workpiece Material (ISO Standard): ISO P (steel/alloy steel) → CVD coating; ISO M (stainless steel/titanium alloy) → PVD-TiAlN coating; ISO K (cast iron) → thick Al₂O₃ CVD coating; ISO S (superalloy) → PVD-TiAlN/AlTiN coating.

2. By Machining Conditions: Continuous/finish machining → high wear-resistant materials; Interrupted/rough machining → high toughness materials; High-speed cutting → TiAlN/Al₂O₃ coating.

3. Insert Model: Taking CNMG120408-RP as an example, it represents shape, clearance angle, precision, chip breaker, insert side length, thickness, nose radius, and chip breaker type in sequence.

V. Industry Trends

Coating-matrix collaborative design, specialization, green manufacturing (low cobalt/cobalt-free), intelligence.

VI. Common Problems and Solutions

Coating Peeling: Choose CVD coating and optimize cutting parameters; Chipping: Choose fine-grain matrix, PVD coating, and increase nose radius; Crater Wear: Choose Al₂O₃ CVD coating; Work Hardening: Choose TiAlN PVD coating and sharp cutting edge.

Send Inquiry