I. Evolution History
Vacuum coating technology is a relatively modern development. In the 1960s, CVD (Chemical Vapor Deposition) was first applied to cemented carbide
tools worldwide. However, early CVD faced severe limitations: it required extremely high process temperatures (above 1000°C) and offered only a narrow range of coating types. As a result, its early development was slow and unsatisfactory.
By the late 1970s, PVD (Physical Vapor Deposition) emerged, bringing new opportunities to the vacuum coating industry. Over the following 20 to 30 years, PVD developed rapidly for several key reasons:
It is environmentally friendly, as film formation occurs in a sealed vacuum chamber with almost no pollution.
It produces bright, high-quality surfaces with rich color options, including multicolor, silver, transparent, gold, black, and gradient shades, satisfying diverse decorative requirements.
It easily forms high-hardness, high-wear-resistance ceramic and composite coatings, significantly extending the service life of tools and molds, thereby improving cost efficiency.
With low-temperature and high-energy characteristics, PVD can deposit films on nearly all substrate materials, enabling extremely broad applications.
Today, advanced technologies such as PCVD (Plasma Chemical Vapor Deposition) and MT‑CVD (Medium‑Temperature Chemical Vapor Deposition) have emerged, accompanied by a wide variety of coating equipment and processes. Nevertheless, the development of vacuum coating technology remains highly unbalanced.
Tool and mold applications involve harsh working conditions and demand much higher film adhesion than decorative coatings. As a result, while decorative coating suppliers are widespread, companies capable of high-performance tool and mold coating remain limited.
In addition, many domestic coating equipment manufacturers cannot provide complete process systems, including pretreatment, coating, post-
treatment, inspection, and application technologies. Technical personnel must master not only coating expertise but also metallurgy, heat treatment, surface preparation, and tool application knowledge. Any flaw in these links can lead to poor performance.
Furthermore, as an interdisciplinary field covering materials science, physics, electronics, and chemistry, advanced tool coating equipment and processes in China still largely rely on imports. Domestic technical capabilities need further improvement and independent innovation to catch up with global advanced levels.
II. Current Status Analysis
(1) Overview of PVD Technology

PVD (Physical Vapor Deposition) includes vacuum evaporation, sputtering, and ion plating. The most mature industrial methods are arc ion plating and magnetron sputtering.
Arc Ion Plating
Arc ion plating features simple equipment and easy operation. The evaporation source operates similarly to electric welding, with arc ignition triggering gas discharge under controlled pressure.
Advantages:High target utilization, high ionization rate, and strong coating‑substrate adhesion. It produces consistent and stable colors, especially uniform golden TiN coatings, which are difficult to achieve with conventional sputtering.
Disadvantages:Using traditional DC power, coatings thicker than 0.3 μm may become hazy. Relatively large deposited particles lead to lower density and poorer wear resistance compared with magnetron sputtering.
Magnetron Sputtering
Developed countries have upgraded magnetron sputtering through unbalanced magnetic fields, 50 kHz mid-frequency power supplies, pulsed bias, and auxiliary anodes. These improvements have enabled stable industrial deposition of TiAlN, AlTiN, TiB₂, DLC, CrN, and other coatings for tools and molds. Such equipment has also been introduced in regions including Guangdong, Jiangsu, Guizhou, and Zhuzhou, showing sound development momentum.
(2) Integration of Arc and Sputtering Technologies
To combine the strengths of arc ion plating and magnetron sputtering, hybrid coating systems have been developed. A typical process includes arc plating for the base layer, sputtering for thickness growth, and arc plating for final color stabilization.
In the mid-to-late 1980s, hot-cathode electron gun evaporation and arc-magnetron plasma coating systems were launched, effectively promoting the popularization of TiN-coated cutting tools.